| |
TM 10-3930-669-34
(9)
Measure the closest distance between the
point marked on the differential (18) in
Step (2) and the machined outside surface
of the differential housing (10). Designate
this distance as Distance C.
(10)
Place a steel straight edge on the surface
of the inner bearing race of bearing (35)
and measure the distance from the inner
bearing race to the machined surface of
the pinion assembly (7). Designate this
distance as Distance D.
(11)
Divide Distance A by two to determine the
inner radius.
(12)
Add the answer to Step (11), Distance B,
and Distance C to determine the distance
from differential centerline to the machined
surface on the differential housing.
10-27
|
