TM 10-3930-669-34 10-2. DRIVE AXLE REPLACEMENT (CONT). (14) Install plate (7) on axle (4) with two washers (6) and screws (5).  Tighten screws to 155 lb-ft (210 N•m). (15)    Install plate (3) on axle (4) with four washers (2) and screws (1). NOTE Follow-on Maintenance: • Install   parking   brake   assembly (TM 10-3930-669-20). • Fill   differential   housing   with   oil (TM 10-3930-669-20). • Fill   drive   axle   housing   with   oil (TM 10-3930-669-20). • Fill planetary hub with oil (TM 10- 3930-669-20). • Bleed    service    brakes    (TM    10- 3930-669-20). • Install  front  wheels  (TM  10-3930- 669-20). • Connect   batteries   (TM   10-3930- 669-20). • Center   mast   assembly   (TM   10- 3930-669-10). • Pivot mast assembly to front (TM 10-3930-669-10). • Remove   wheel   chocks   (TM   10- 3930-669-10). END OF TASK 10-8