TM 10-3930-669-34 WARNING Adhesive  causes  immediate  bonding  on  contact  with  eyes,  skin,  or  clothing  and  also  gives  off harmful vapors.  Wear protective goggles and use in well-ventilated area.  If adhesive gets in eyes, try to keep eyes open; flush eyes with water for 15 minutes and get immediate medical attention. (9) Apply sealing compound to four dowels (20). (10) Install four dowels (20) on axle housing (8). (11) Install  shims  (12)  and  planetary  hub  assembly (11) on four dowels (20). (12) Apply sealing compound to four screws (9). (13) Install locking plate (10) on axle housing (8) with four screws (9).  Tighten screws to 184 lb-ft (250 N•m). NOTE •  The force required to turn the wheel hub must be 9-11.25 lbs (40-50 N). •  Add or remove 0.089 in.  (0.02 mm) thickness of shims for each 2.25 lbs (10 N) change desired. (14) Attach pull scale to wheel hub (4). (15) While   observing   the   scale,   pull   on   pull scale until the wheel hub (4) turns. 9-11