TM 10-3930-669-34 8-7. FORWARD SHAFT REPLACEMENT/REPAIR (CONT). (13) Coat  gear  (25)  and  thrust  washers  (24  and  23) with clean transmission oil. NOTE Rotate    gear    during    installation    to ensure it has meshed with all friction clutch plates. (14) Install gear (25) on bearings (26) and into friction clutch plates (30). (15) Install  thrust  washers   (24   and   23)   on   forward shaft (1). (16) Coat bearing (22) with clean transmission oil. NOTE Components  on  forward  shaft,  under bearing,   should   not   be   loose   after bearing is installed. (17) Using  a  press,  install  bearing  (22)  on  forward shaft (1) until it seats firmly against thrust washer (23). 8-60