TM 10-3930-669-34 CAUTION Parts  held  on  input  shaft  by  bearing are  not  a  press  fit.    These  parts  will come off input  shaft  when  bearing  is removed. (2) Using  a  puller,  remove  bearing  (4)  from  input shaft (1). (3) Remove   thrust   washer   (5)   and   gear   (6)   from input shaft (1). (4) Remove     two     bearings     (7)     and     two     thrust washers (8 and 9) from input shaft (1). 8-41