TM 10-3930-669-34 8-5. OUTPUT SHAFT REPLACEMENT/REPAIR. This task covers: a. Removal c. Cleaning/Inspection e. Installation b. Disassembly d. Assembly INITIAL SETUP Tools and Special Tools Materials/Parts Tool Kit, General Mechanic’s: Automotive Solvent, Dry-cleaning (Item 20, Appendix B) (Item 1, Appendix E) Oil, Transmission (Item 25, Appendix B) Press, 60 Ton (Item 5, Appendix E) Seal Puller (Item 5, Appendix E) Equipment Condition Auxiliary pump drive removed (Para 8-4) a Removal. WARNING Transmission   case   weighs   250   lbs (113 kg).  Use  the  aid  of  an  assistant when moving transmission case. (1) With  the  aid  of  an  assistant,  place  transmission case (1) on wooden blocks with open end facing up. (2) Remove  output  shaft  (2)  with  bearing  (3)  and gear    (4)    from    gear    (5)    and    bearing    (6)    in transmission case (1). (3) Remove gear (5) from transmission case (1). 8-35