TM 10-3930-669-34 3-14.  CRANKSHAFT REPLACEMENT/REPAIR. This task covers: a. Removal c. Cleaning/Inspection e. Installation b. Disassembly d. Assembly INITIAL SETUP Tools and Special Tools Materials/Parts - Continued Tool Kit, General Mechanic’s: Automotive Solvent, Dry-cleaning (Item 1, Appendix E) (Item 34, Appendix B) Drill (Item 5, Appendix E) Magnaflux Penetrant (Item 28, Appendix C) Micrometer (Item 5, Appendix E) Gasket Gauge, Dial, Bore, Cylinder Plugs (4) (Item 5, Appendix E) Seal Press, 60 Ton (Item 5, Appendix E) Washers (4) Puller, Bearing (Item 5, Appendix E) Wrench, Torque (0-60 N•m) Equipment Condition (Item 5, Appendix E) Flywheel removed (Para 8-9) Piston and connecting rod assemblies Materials /Parts removed (Para 3-13) Grease, Automotive and Artillery (Item 13, Appendix B) Lubricating Oil (Item 15, Appendix B) a. Removal. (1) Remove eight screws (1), washers (2), cover (3), and gasket (4) from crankcase (5).  Discard gasket. (2) Remove seal (6) from cover (3).  Discard seal. 3-73