TM 10-3930-669-34 3-12. OIL PUMP REPLACEMENT. This task covers: a. Removal b. Cleaning/Inspection c. Installation INITIAL SETUP Tools and Special Tools Materials Parts Tool Kit, General Mechanic’s: Automotive Solvent, Dry-cleaning (Item 20, Appendix B) (Item 1, Appendix E) Gasket (2) Wrench, Torque (0 - 60 N.m) Sleeve, Coupling (Item 5, Appendix E) Washer, Lock (2) Wrench, Torque (0 to 175 lb-ft [0-237 N-m]) Washer, Lock (2) (Item 5, Appendix E) Washer, Lock (2) Equipment Condition Front cover removed (Para 3-10) Oil pan removed (Para 3-8) a. Removal (1) Remove  two  nuts  (1),  lock  washers  (2), and screws (3) from pipe  brackets  (4  and 5).  Discard lock washers. (2) Loosen ferrule nut (6) and remove suction pipe  (7)  and  coupling  sleeve  (8)  from  oil pump (9).  Discard coupling sleeve. (3) Remove   two   screws   (10),   lock   washers (11),   and   pipe   brackets   (4   and   5)   from crankcase (12).  Discard lock washers. 3-62