| |
TM 10-3930-669-34
3-7.
CYLINDER REPLACEMENT.
This task covers:
a.
Removal
b.
Installation
INITIAL SETUP
Tools and Special Tools
Equipment Condition
Tool Kit, General Mechanic’s: Automotive
Cylinder head removed (Para 3-5)
(Item 1, Appendix E)
Compressor, Piston Ring
(Item 20, Appendix E)
Materials /Parts
Grease, Automotive and Artillery
(Item 13, Appendix B)
Lubricating Oil (Item 15, Appendix B)
Shim (3)
a.
Removal.
CAUTION
Ensure that piston will not tilt over
and hit engine block after removal of
cylinder, or damage to piston may
occur.
NOTE
All four cylinders are removed the
same way. No. 1 cylinder shown.
(1)
Remove cylinder (1) from engine block (2),
and place two wooden blocks under piston
(3).
(2)
Remove
shims
(4)
from
cylinder
(1).Discard shims.
3-50
|