TM 10-3930-669-34 a.  TDC Equipment Setup. WARNING BURN HAZARD Allow   engine   to   cool   before   performing   maintenance   on   the   muffler,   exhaust   pipe,   exhaust manifold, or turbocharger.  If necessary, use insulated pads and gloves. NOTE Cylinder number designation starts with No.  1 cylinder closest to transmission. (1) Remove  screw  (1),  washer  (2),  washer  (3),  valve  cover  (4),  and  gasket  (5)  from  engine  (6)  cylinder  No.    1. Discard gasket. NOTE •    All  turning  of  engine  will  be  done  with retainer at crankshaft pulley. •  All turning of engine will be described as if looking  at  the  crankshaft  pulley  end  of engine. (2) Using  retainer  to  turn  pulley  (7),  turn  engine  (6) to the right. 3-9