| |
TM 10-3930-669-20
15-2. CAB POSITIONING/REPLACEMENT (CONT).
(13)
Install parking brake cable (52) on brake lever
(57) with pin (56), washer (55), and cotter pin
(54).
(14)
Position parking brake cable (52) in bracket
(53). Do not tighten two nuts (51).
(15)
Install cable (50) to bracket (42) with clamp (49),
two washers (48), and nuts (47).
(16)
Install clevis (45) on throttle bracket (46) with
pin (44) and clip (43).
(17)
Install plate (39) on bracket (42) with two screws
(41) and nuts (40).
(18)
Install two nuts (38) in plate (39).
NOTE
·
Steering control pump will have to
be raised slightly for installation of
mounting hardware.
·
Ensure spacers are aligned between
floor plate and steering column prior
to installation.
(19)
Position steering control pump (36) and four
spacers (35) under steering control shaft (37).
(20)
Install steering control pump (36), with four
spacers (35) on steering control shaft (33) and
steering column linkage (37) with four washers
(32) and screws (31).
15-16
|
