TM 10-3930-669-20 15-2.  CAB POSITIONING/REPLACEMENT (CONT). (3) Install three mounts (82) on cab (70) with three mounts (80). (4) Position three washers (83) on forklift (81), as noted during removal and lower cab (70) until just touching forklift. NOTE Align  bolt  holes  of  cab  mounts  with  bolt  holes  of  forklift  before  allowing  full  weight  to  settle  and  final tightening of screws. (5) Install  mount  (82),  mount  (80),  washer  (73),  washer  (72),  and  screw  (71)  inside  cab  (70)  and  remove  lifting device. 15-14