| |
TM 10-3930-669-20
13-6. KNUCKLE REPLACEMENT (CONT).
(7)
Install bearing cup (19) in pin cover (7).
(8)
Pack lower bearing cone (18) with grease.
(9)
Install lower bearing cone (18) in pin cover (7).
(10)
Coat lower seal (17) with grease.
(11)
Using a soft-face mallet, install lower seal (17)
in pin cover (7).
CAUTION
Caution should be
taken not to damage
the upper seal when
installing the knuckle.
(12)
Install knuckle (4) in the upper axle bore (11)
and lower axle bore (10).
(13)
Install pin cover (7) in lower axle bore (10) and
knuckle (4) with three screws (8).
(14)
Using a depth gauge, measure the distance
between lower axle (10) and pin cover assembly
(7). Select appropriate shim from shims pack
that will add up to a total shim thickness of less
than .005-.009 in. (0.127-0.226 mm) for DIM.
X.
13-22
|
