| |
TM 10-3930-669-20
13-4. STEERING PUMP REPLACEMENT.
This task covers:
a. Removal
b. Cleaning/Inspection
c. Installation
INITIAL SETUP
Tools and Special Tools
Tool Kit, General Mechanic's: Automotive
(Item 1, Appendix B)
Materials/Parts
Cable Ties (Item 4, Appendix C)
Rags, Wiping (Item 19, Appendix C)
Solvent, Drycleaning (Item 20, Appendix C)
Materials/Parts - Continued
Tags, Identification (Item 21, Appendix C)
Packing, Preformed
Packing, Preformed (4)
Equipment Condition
Wheels chocked (TM 10-3930-669-10)
a. Removal
WARNING
Hydraulic fluid is very slippery and
can cause falls. To avoid injury,
wipe up fluid with rags.
NOTE
·
Tag and mark hydraulic hoses before
removal.
·
Remove cable ties as required.
·
Place container with a 1 qt. (1 liter)
capacity under control unit to catch
spilling fluid.
·
Perform only Step (1) when setting
equipment
condition
for
brake
linkage replacement/ adjustment.
(1)
Remove four screws (1) and washers (2).
(2)
Remove control pump (4) exercising care not to disturb spacers (3).
13-10
|
