TM 10-3930-669-20 11-6.  BRAKE PEDAL AND LINKAGE REPLACEMENT/ADJUSTMENT (CONT). b.  Cleaning/Inspection. WARNING • Drycleaning solvent (P-D-680) is TOXIC and flammable.  Wear protective goggles and gloves; use only in a well-ventilated area; avoid contact with skin, eyes, and clothes; and do not breathe vapors.  Keep away from heat or flame.  Never smoke when using solvent; the flashpoint for type I drycleaning solvent is 100°F (38 °C) and for type II is 138°F • If personnel become dizzy while using cleaning solvent, immediately get fresh air and medical help.  If solvent contacts skin or clothes, flush with cold water.  If solvent contacts eyes, immediately flush eyes with water and get immediate medical attention. (1)   Clean all metal parts with drycleaning solvent and wipe dry with wiping rag. (2)   Inspect all parts for breaks, cracks, burrs, and sharp edges. (3)   Inspect all bearings for wear, scoring, and cracks. (4)   Replace all damaged parts. c.  Installation. (1)   Install rod end (35) on pivot (29) with screw (34), washer (32), washer (33), and nut (31). (2)   Install rod end (30) on pivot (29) with screw (28), washer (27), washer (26), and nut (25). 11 -22