TM 10-3930-669-20 11-3.  PARKING BRAKE CABLE REPLACEMENT/ADJUSTMENT. This task covers: a.  Removal c.  Installation b.  Cleaning/Inspection d.  Adjustment INITIAL SETUP Tools and Special Tools Tool Kit, General Mechanic's: Automotive (Item 1, Appendix B) Wrench, Torque (O to 175 lb-ft [0-237 N-m]) (Item 2, Appendix B) Materials/Parts Rags, Wiping (Item 19, Appendix C) Solvent, Dry-cleaning (Item 20, Appendix C) Equipment Condition Engine OFF (TM 10-3930-669-10) Parking brake applied (TM 10-3930-669-10) Wheels chocked (TM 10-3930-669-10) Cab door opened (TM 10-3930-669-10) Batteries disconnected (Para 7-48) Instrument panel removed (Para 7-8) a.  Removal (1)   Place parking brake handle assembly (1) handle in forward position to relieve tension on parking brake cable (2). (2)   Loosen two nuts (3 and 4) and remove parking brake cable (2) from cab frame bracket (5). (3)   Remove retaining pin (6), washer (7), pin (8), four washers (9), and clevis (10) from parking brake handle assembly (1). 11-5