| |
TM 10-3930-669-20
8-5. TRANSMISSION OIL FILTER ADAPTER REPLACEMENT (CONT).
(6)
Remove three nuts (8), washers (9), screws
(10), and transmission oil filter head (4) from
filter tray (11).
NOTE
Record connection points of hoses
during
disassembly
to
aid
in
reassembly.
(7)
Remove hose (7) from fitting (12).
(8)
Remove fitting (12) from transmission oil filter
adapter (13).
(9)
Remove hose (5) from fitting (14).
(10) Remove fitting (14) from transmission oil filter
adapter (13).
(11) Remove transmission oil filter adapter (13) and
preformed packing (15) from transmission (16).
b.
Cleaning/lnspection.
WARNING
•
Dry-cleaning solvent (P-D-680) is TOXIC and flammable. Wear protective goggles and
gloves; use only in a well-ventilated area; avoid contact with skin, eyes, and clothes and do
not breathe vapors. Keep away from heat or flame. Never smoke when using solvent; the
flashpoint for type I dry-cleaning solvent is 100°F (38°C) and for type II is 138°F (50°C).
Failure to do so may result in injury or death to personnel.
•
If personnel become dizzy whil e using cleaning solvent, immediately get fresh air and
medical help. If solvent contacts skin or clothes, flush with cold water. If solvent contacts
eyes, immediately flush eyes with water and get immediate medical attention.
(1)
Clean all parts with dry-cleaning solvent.
(2)
Inspect hoses for holes, cracks, and deterioration.
(3)
Inspect oil filter head for cracks and damage.
(4)
Notify supervisor of any damage.
8-18
|
