TM 10-3930-669-20 7-38.  SHUNT ASSEMBLY REPLACEMENT (CONT). (5) Install   two   cables   (20   and   21)   on terminal   (12)   with   lock   washer   (19) and nut (18). (6) Install three washers (17) and bar (16) on two terminals (7 and 13) with lock washer (15) and nut (14). (7) Install  two  wires  (10  and  11)  on  two terminals  (12  and  13)  with  two  lock washers (9) and screws (8). (8) Install  three  cables  (4,  5,  and  6)  on terminal    (7)    with    washer    (3),    lock washer (2), and nut (1). NOTE Follow-on Maintenance: • Install relay panel (Para 7-51). • Install engine ventilation panel (Para 6-2) • Connect batteries (Para 7-48). • Remove   wheel   chocks   (TM 10-3930-669-10). END OF TASK 7-88