TM 10-3930-669-20 7-29.  REAR WORK LIGHT REPLACEMENT (CONT). (4) Remove nut (10), lock washer (11), screw (12), and bracket (9) from bracket (13). (5) Remove   two   screws   (14),   washers   (15),   and bracket (13) from chassis (16). b.  Installation. (1) Install   bracket   (13)   on   chassis   (16)   with   two washers (15) and screws (14). (2) Install  bracket  (9)  on  bracket  (13)  with  screw (12), lock washer (11), and nut (10). (3) Install light assembly (8) on bracket (9) with two lock washers (7), screw (6), and nut (5). (4) Install light wire (3) in conduit (4). (5) Connect connector (1) on light connector (2). NOTE Follow-on Maintenance: •   Remove wheel chocks (TM 10-3930-669-10). END OF TASK 7-62