TM 10-3930-669-20 NOTE Place transmission shift lever in neutral (center position) prior to removal. (3) Remove transmission shift lever (6) and rubber boot (7) from steering shaft (8). NOTE Tag and mark all wires prior to removal. (4) Disconnect   two   wires   (9   and   10)   from   switch (11). (5) Remove   lock   nut   (12)   and   screw   (13)   from switch  (11)  and  mounting  plate  (14).    Discard lock nut. (6) Remove  switch  (11)  from  pin  (15)  on  mounting plate (14). b.  Installation. (1) Position   switch   (11)   on   pin   (15)   of   mounting plate (14). (2) Install  screw  (13)  and  lock  nut  (12)  on  switch (11) and mounting plate (14). (3) Connect two wires (9 and 10) on switch (11). 7-47