| |
TM 10-3930-669-20
(2)
Install cable (13) on bracket (5) with clamp (12),
two washers (11), and nuts (10).
(3)
Install clevis (8) on throttle bracket (9) with pin
(7) and clip (6).
(4)
Install plate (2) on bracket (5) with two screws
(4) and nuts (3).
(5)
Install two nuts (1) on plate (2).
NOTE
Follow-on Maintenance:
·
Install cab floor plate (Para 15-
12).
·
Adjust throttle cable (Para 4-12).
·
Close cab door (TM 10-3930-669-
10).
·
Remove wheel chocks (TM 10-
3930-669-10).
END OF TASK
4-37
|
