| |
TM 10-3930-669-20
CAUTION
Area around filter must be very clean. Any contaminants entering oil filter adapter assembly will
damage equipment.
(4)
Using wiping rags clean area around oil filter (4).
(5)
Position wiping rags under oil filter (4) to catch excess engine oil.
(6)
Remove oil filter (4) and preformed packing (5) from oil filter adapter assembly (6). Discard filter and preformed
packing.
b.
Cleaning/Inspection.
(1)
Inspect oil filter adapter assembly for cracks and damage.
(2)
Replace damaged parts or notify supervisor.
c.
Installation.
(1)
Coat surface of preformed packing (5) with a
light coat of clean engine oil.
(2)
Install oil filter (4) with preformed packing (5) on
oil filter adapter assembly (6). Tighten oil filter
one-half turn after preformed packing contacts
oil filter adapter assembly.
(3)
Remove wiping rags from under oil filter (4).
(4)
Coat preformed packing (2) with clean engine
oil.
(5)
Install preformed packing (2) and drain plug (1)
in drain plate (3).
3-25
|
