| |
TM 10-3930-669-20
CONTINUITY TEST
(1)
Set multimeter select switch to
OHMS.
(2)
Check continuity between connector
P18, terminal 2 and a known good
ground.
(a)
If there is no continuity, repair
axle oil pump ground wire (see
schematic Appendix F).
(b)
If there is continuity, replace
axle oil pump (Para 10-3).
(3)
Connect connector P18 on axle oil
pump connector.
(4)
Install oil filter tray (Para 4-13).
2-365
|
