| |
TM 10-3930-669-20
VERIFY REPAIR
(1) Set MAIN POWER switch to ON
position (TM 10-3930-669-10).
(2) Set engine switch to ignition position
(TM 10-3930-669-10).
(3) Set transmission range switch to HIGH
RANGE position (TM 10-3930-669-10).
(4) Observe HIGH RANGE indicator.
(a) If HIGH RANGE indicator does not
operate,
fault
not
corrected.
Perform Steps (5) through (7) below
and repeat procedure and notify
Supervisor.
(b) If HIGH RANGE indicator operates,
fault corrected.
(5) Set transmission speed switch to LOW
RANGE position.
(6) Set engine switch to off position.
(7) Set MAIN POWER switch to OFF
position.
2-267
|
