TM 10-3930-669-20 d.  Assembly. (1) Install boot (29) on pivot/shift joystick lever (24) and pivot/shift joystick (15). (2) Install   knob   (28)   on   pivot/shift   joystick   lever (24). (3) Position  two  cable  retainers  (26)  on  cables  (4 and 5). (4) Install   two   anchors   (27)   with   loctite   242   on cables  (4  and  5).    Position  anchors  such  that they are flush with the ends of cables. CAUTION Hold plunger stationary when installing cable retainer or damage to pivot/shift joystick will result. NOTE Moving pivot/shift joystick lever will allow plungers to protrude from pivot/shift joystick. (5) Position pivot/shift joystick lever (24) to protrude each  of  two  plungers  (25)  and  install  cables  (4 and 5) and anchors (27) with two cable retainers (26). 17-7

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business