TM 10-3930-669-20 17-2.  PIVOT/SHIFT JOYSTICK REPLACEMENT/REPAIR (CONT). NOTE Note routing of cables prior to removal. (6) Route   pivot   control   valve   cable   (4)   and   shift control  valve  cable  (5)  through  access  hole  in cab frame (11). (7) Remove   four   screws   (12),   lock   washers   (13), washers  (14),  and  pivot/shift  joystick  (15)  from dash frame (16).  Discard lock washers. b.  Disassembly. NOTE Pivot control cable disassembly is shown. Shift control cable is disassembled the same way. (1) Remove   nut   (17)   and   bracket   (2)   from   pivot control   valve   cable   (4)   of   pivot/shift   joystick (15). (2) Remove lock washer (18) and nut (1) from pivot control   valve   cable   (4)   of   pivot/shift   joystick (15).  Discard lock washer. 17-4