SPECIAL INFORMATION. - TM-10-3930-668-24P0011

TM 10-3930-668-24P

EXPLANATION OF COLUMNS (SECTION IV) (CONT). |

(2)

ITEM column. This item number is that number assigned to the item as it appears in the figure

referenced in the adjacent figure number column.

(3)

STOCK NUMBER column. This column lists the NSN for the item.

(4)

CAGEC column. The Commercial and Government Entity Code (CAGEC) is a 5-digit numeric code

used to identify the manufacturer, distributor, or Government agency, etc., that supplies the item.

(5)

PART NUMBER column. Indicates the primary number used by the manufacturer (individual,

company, firm, corporation, or Government activity), which controls the design and characteristics of

the item by means of its engineering drawings, specifications standards, and inspection requirements

to identify and item or range of items.

SPECIAL INFORMATION.

a. Usable on Code. The usable on code appears in the lower left corner of the Description column heading.

Usable on codes are shown as 'UOC...." in the Description Column (justified left) on the last line applicable item

description/nomenclature. Uncoded items are applicable to all models. Identification of the usable code used in this

publication is:

Code

Used On

GJH

b. Fabrication Instructions. Bulk materials required to manufacture items are listed in the Bulk Material

Functional Group of this RPSTL. Part numbers for bulk materials are also referenced in the description column of the

line item entry for the item to be manufactured/fabricated. Detailed fabrication instructions for items source coded to be

manufactured or fabricated are found in TM 10-3930-68 14.

c. Assembly Instructions. Detailed assembly instructions for items source coded to be assembled from

component spare/repair parts are found in TM 10-3930-668-14. Items that make up the assembly are listed immediately

following the assembly item entry or reference is made to an applicable figure.

Kits Line item entries for repair parts kits appear in a group in Section II (see table of contents).

e. Index Numbers . Items which have the word BULK in the figure column will have an index number shown

in the time number column. This index number is a cross-reference between the National Stock Number/Part Number

Index and the bulk material list in section II.

Associated Publications. The publications listed below pertain to the Truck and its components:

Publication

Short Title

To be provided by the Government

HOW TO LOCATE REPAIR PARTS.

When National Stock Number or Part Number Is NOT Known.

(1)

Using the table of contents, determine the assembly group or subassembly group to which the item

belongs. This is necessary since figures are prepared for assembly groups and subassembly groups,

and listings are divided into the same groups.