Quantcast installation - TM-10-3930-664-24_817
Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
TM 10-3930-664-24 7.  Insert three planet gears (12) into carrier (3). 8. Install  bearings  (9)  and  spacers  (10)  onto  pins  (8). Install new Orings (7). 9. Position  friction  washers  (11)   under   planet   gears (12), ensuring that washers are aligned with holes in planet gears and gear carriers. Tab must be on inside of gear carrier ring. 10. Press   assembled   pins   (8)   and   bearings   (9)   into carrier   (3).      Tap   into   place   using   a   soft   head hammer. 11. Install  new  circlip  (6)  into  groove  at  rear  of  carrier (3). 12. Carefully   install   carrier   (3)   onto   wheel   hub   (5). Secure using three bolts (4). 13. Install wheel assembly (para. 2113). 14. Position   fill/drain   port   at   center   of   axle.      Service planetary gear carrier with fresh oil.  Install plug (1) and new seal washer (2). FOLLOW-ON MAINTENANCE: None END OF TASK 4-81

Integrated Publishing, Inc.