24. Press bearings (9, 7) and spacer (8) into forward
gear and bearing assembly (4). Bearings must be
flush with face of gear on both sides.
25. Carefully install gear and bearing assembly (4) onto
shaft (5), using care not to damage shaft splines (6).
Align gear teeth with clutch inner discs. Press down
on gear and bearing assembly until fully seated. Do
not force this operation.
26. Install inner thrust washer (3), bearing (2), and outer
thrust washer (1) onto shaft (5).
Install clutch assemblies (para. 4-20)
END OF TASK