Quantcast removal - TM-10-3930-664-24_796
Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
TM 10-3930-664-24 3. Remove  outer  thrust  washer  (10),  bearing  (11), and inner thrust washer (12) from shaft (6). 4. Remove snap ring (13) from ring groove. 5. Remove  clutch  end  plate  (14),  six  inner  discs (15), and six outer discs (16) from shaft (6). 6. Compress  disc  washers  (19)  and  remove  snap ring (17) using pliers.  Remove retainer (18). NOTE Disc washers are installed as a set.  Do not intermix with sets from other clutches.      Replace   disc   washers   as   a set. 7. Remove  five  disc  washers  (19)  and  wear  plate (20) from shaft (6). 8. Turn  clutch  over  and  tap  shaft  (6)  with  a  soft head hammer to remove clutch piston (21). 9. Remove and discard seals (22, 23). 4-60

Integrated Publishing, Inc.