Quantcast INSTALLATION (cont) - TM-10-3930-664-24_781
Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
TM 10-3930-664-24 10. Press  seat  (18)  into  spacer  plate  (6).    Secure using new snap ring (17). 11. Install  safety  valve  poppet  (16)  into  seat  (18). Compress    spring    (14)    and    install  retaining washer (15). 12. Apply a thin coat of loctite to threads of pressure plug    (12)    and    outlet    temperature    plug    (13). Install plugs into spacer plate (6). 13. Lubricate  new  seal  (11)  with  oil  and  install  onto sensor port plug (10).  Apply a thin coat of loctite to  threads  of  plug  and  install  into  spacer  plate (6). 14. Mate new gasket (9) to transmission (8).  A light coat of grease will hold gasket in place. 15. Mount spacer plate (6) onto dowel pins (7).  Tap spacer   plate   into   position   on transmission (8) using a soft head hammer. 16. Install  five  screws  (3),  two  screws  (4),  and  new lockwashers  (5).    Torque  screws  to  50  to  55  ft- lbs.  (68 to 75 Nm). 4-45

Integrated Publishing, Inc.