Quantcast ROLLOVER PROTECTION STRUCTURE (ROPS) REPLACEMENT
Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
TM 10-3930-664-24 3-55.  ROLLOVER PROTECTION STRUCTURE (ROPS) REPLACEMENT This task covers: Removal, Cleaning, Inspection, and Installation INITIAL SETUP: Tools and Test Equipment: Equipment Condition: General Mechanics Tool Kit (1, App E) Instrument panel removed Sling (4, App E) (para. 2-58) Ether cylinder removed Reference: (para. 2-40) ROPS drive lights removed TB 9-2300-247-40 (para. 2-65) Master cylinders removed Personnel Required: (para. 2-111) Front fenders removed 2 Personnel (para. 2-134) Cab assy removed (para 3-53) A. REMOVAL 1. Tag  electrical  wiring  (1).    Remove  wiring  from ROPS   frame   (5)   by   removing   screws   (2)   and clamps (3). 2. Remove  mirrors  (4)  and  brackets  from  ROPS frame  (5)  by  removing  screws  (6),  washers  (7), and nuts (8). NOTE Hose  assemblies  are  secured  to  left splash  guard  (9)  with  clamps.    Hose assemblies  and  clamps   may   remain in place during guard removal. 3. Remove left and right splash guards (9, 10) from ROPS  frame  (5)  by  removing  four  screws  (11), washers (12), lockwashers (13), and nuts (14). 4. Separate  left  splash  guard  (9)  from  right  splash guard (10) by removing screw (15), washer (16), and nut (17). 5. Remove  forklift  level  indicator  gauge  (18)  from ROPS  frame  (5)  by  removing  screws  (19)  and nuts (20). 3-180

Integrated Publishing, Inc.