TM 10-3930-664-24 4. INSTALL  LATCH  LEVER  (22)  ONTO  DRIVER SIDE PANEL WELDMENT (8). a. Install   plastic   grip   (23)   onto   lever   (22). Install screw (20), nut (21), and lever. b. Install  screws (15), backup seal (16), nuts (17), and door release seal (18) onto panel weldment (8). c. Attach spring (19). 5. INSTALL BUMPER (7), SEAL PLATE (10), AND STRIKER (13) ONTO PANEL WELDMENT (8). a. Install striker (13) onto panel weldment (8) using nut (14). b. Install rubber seal (12) and seal plate (10) onto   base   of   panel   weldment   (8)   using four screws (11). c. Install    rubber    bumper    (7)    onto    panel weldment (8) using nut (9). 3-178