Quantcast removal - TM-10-3930-664-24_675
Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
TM 10-3930-664-24 4. Tag and disconnect electrical wiring from windshield wiper motor (18). 5. Tag  and  disconnect  electrical  wiring  from  upper flood   lights   (19)   and   lights   on   front   fenders. Release    wiring    from    clamps    (20)    and    feed through  holes  in  sides  of  front  cover  assembly (14). 6. Release   cylinder   slot   covers   (10)   from    front cover    assembly    (14)    by    removing    fourteen screws (11). 7. Remove hose clamp (13)  from  right  tilt  cylinder. Break  sealant  around  slot  covers  (10)  and  slide covers and cover seals (12) off tilt cylinders. CAUTION To avoid damaging front cover assembly,     enlist     the     help     of     an assistant when removing. Hold assembly    in    place    while    attaching parts are removed. 8. Remove  front  cover  assembly  (14)  from  ROPS frame (6) by removing four bolts (15), lockwashers (16), and washers (17). CAUTION Use   care   when   removing   heater   to prevent   damage   to   hoses.      Hoses may be left on during removal. 9. Remove heater (21) from right side panel (22) by removing screws (23) and nuts (24).  Disconnect hoses as required. 10. Release right window frame (25) from right side panel  bracket  (26)  by  removing  screw  (27)  and nut (28). 11. Tag  and  disconnect  electrical  wiring  from  rear defroster fan (29). 12. Remove    rear    defroster    fan    (29)    from    right window   frame   and   cab   roof   (5)   by   removing screws (30) and nuts (31). 3-170

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business