Quantcast DISASSEMBLY - TM-10-3930-664-24_655
Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
TM 10-3930-664-24 5. Remove   drive   (9)   and   spacer   plate   (10)   from housing (4).  Remove and discard seal (11). 6. Remove housing from vise. 7. Tip housing (4) as shown.  Remove two springs (12), retainer plugs (13), and balls (14). 8. Place housing (4), geroter end down, on a clean soft cloth. 9. Remove   retaining   ring   (15)   from   housing   (4) using a thin bladed screwdriver.  Use care not to damage surfaces. 10. Lift spool and sleeve assembly up far enough to free  seal  gland  bushing  (16).    Remove  bushing from housing (4). 3-150

Integrated Publishing, Inc.