Quantcast ADJUSTMENT - TM-10-3930-664-24_653
Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
TM 10-3930-664-24 E.  ADJUSTMENT 1. Ensure  that  piston  rod  of  steering  cylinder  is  at half stroke. 2. Check  parallelism  between  both  wheel  hubs  at approximately 20 inches from hub center. 3. If  not  parallel,  loosen  security  clip  bolts  (6)  and nuts (7). 4. Adjust  until  parallel.    Position  security  clips  (8) and tighten bolts (6) and nuts (7). FOLLOW-ON MAINTENANCE: None END OF TASK 3-148

Integrated Publishing, Inc.