TM 10-3930-664-24 NOTE Intermediate   test   results   are   displayed   indicating   test   in   progress.      The   end   result   will alternately show the software revision number and PASS message. The  display  software  revision  number  has  a  month  (one  digit),  a  year  (two  digits),  and  the revision number which is always zero. (e) Wait for the alternate display of the revision number and the PASS message. NOTE The software revision number flashing on the display should match the portion of the label on the side of the VTM. (f) Compare  the  revision  number  displayed  with  the  revision  number  on  the  VTM  label.    If  they  are different, return the STE/ICE-R set to DS maintenance. k. STE/ICE GO-Chain Tests.  The STE/ICE GO-Chain tests listed in Figure 2-3 may be utilized in testing the forklift. Tests should be preformed sequentially.  Refer to the STE/ICE Technical Manual for test procedures. 2-16