TM 10-3930-664-24 C.  INSPECTION Inspect  pressure  regulator  assembly  and transmission bore in accordance with paragraph 1-24. D.  INSTALLATION 1. Insert pressure regulator  assembly  (4)  into  bore in transmission (5). 2. Using   manufactured   tool   and   torque   wrench, tighten regulator assembly sleeve to 45 to 50 ft- lbs (61 to 67 Nm). 3. Install new oil filter (3).  Torque to 20 to 25 ft-lbs (27 to 34 Nm). 4. Close  hood  assembly  (2).    Ensure  handle  (1)  is fully engaged. FOLLOW-ON MAINTENANCE: Service transmission (para.  2-93) Raise towbar and lock in position (para.  2-126) END OF TASK 3-111

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business