TM 10-3930-664-24 A.  REMOVAL 1. Remove   six   screws   (1)   and   washers   (2)   that secure backing ring (3) and drive plates (4, 5). 2. Carefully   remove   backing   ring   (3)   and   drive plates (4, 5) from converter housing. 3. Using  pliers.    remove  snap  ring  (6)  from  stator shaft. 4. Remove  torque  converter  plug  (7),   O-ring   (8), and snap ring (9).  Discard O-ring. 5. Carefully   remove    torque    converter    (10)    from converter  housing  (11).    Place  converter  on  a clean work surface for inspection. B.  CLEANING Clean  backing  ring,  drive  plates,  and  torque  converter components in accordance with paragraph 1-24. C.  INSPECTION Inspect components in accordance with paragraph 1-24. 3-104