Quantcast ACCELERATOR SLAVE CYLINDER REPAIR
Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
TM 10-3930-664-24 3-24.  ACCELERATOR SLAVE CYLINDER REPAIR This task covers: Disassembly, Cleaning, Inspection, Repair, and Assembly INITIAL SETUP: Tools and Test Equipment: General Mechanics Tool Kit (1, App.  E) Drain Pan (10, App.  E) Materials / Parts: Equipment Condition: Isopropyl Alcohol (2, App.  C) Accelerator slave cylinder Brake Fluid (5, App.  C) removed (para.  2-43) O-Ring, Item 5 (1 ea.) T-Seal, Item 14 (1 set) A.  DISASSEMBLY CAUTION Do not place cylinder in a vise or similar tool  to  disassemble.    Vise  will  damage cylinder    housing    and    prevent    proper cylinder operation. NOTE Disassemble  cylinder  over  drain  pan  to catch fluids. 1. Remove bleeder screw (1) and plug (2) from end cap (3). 2. Remove  end  cap  (3)  from  cylinder  housing  (4). Remove and discard O-ring (5). 3. Remove wiper seal (6) by carefully threading off end of end cap assembly (7). 4. Remove three setscrews (8). Remove assembled  end  cap  assembly  (7)  and  push  rod (9) from cylinder housing (4). 3-79

Integrated Publishing, Inc.