| |
TM 10-3930-664-24
12.
Install guide (15), washer (14), spring (13), and
lever stop (12). Install control lever (10) using
nut (11).
13.
Install guide (9) and spring (8) with spring loop
around boss on governor cover. Hook opposite
end of spring around mechanical shutdown lever
(5).
14.
Rotate mechanical shutdown lever (5) clockwise
until lever engages onto shaft.
15.
Install nut (6) and washer (7). Torque nut to 30
in-lbs (3.4 N•m).
16. Mate new gasket (4) to cover plate (1). Install
cover plate (1) using screws (2) and washers (3).
Install lockwire between screws.
FOLLOW-ON MAINTENANCE:
Install fuel injector pump (para. 3-20)
END OF TASK
3-72
|
