TM 10-3930-664-24 3-21.  FUEL INJECTOR PUMP REPAIR This task covers: Disassembly, Cleaning, Inspection, Repair, and Assembly INITIAL SETUP: Tools and Test Equipment: General Mechanics Tool Kit (1, App.  E) Torque Wrench (32, App.  E) Torque Wrench (33, App.  E) Drain Pan (10, App.  E) Materials / Parts: Equipment Condition: Lubricating Oil (14, App.  C) Fuel injector pump removed Grease (10, App.  C) (para.  3-20) Lockwire, App.  C) Gasket, Item 4 (1 ea.) Sealing Ring, Item 25 (1 ea.) Washer, Item 27 (1 ea.) Sealing Ring, Item 30 (1 ea.) Sealing Ring, Item 38 (1 ea.) A. DISASSEMBLY 1. Place  fuel  pump  on  its  side,  cover  plate  (1)  facing up.  Remove lockwire from screws and discard. 2. Remove cover plate (1) by removing screws (2) and washers (3).  Remove and discard gasket (4). 3. Drain pump oil into pan. 4. Remove mechanical shutdown lever (5) by removing nut (6) and washer (7).  Remove spring (8) and guide (9). 5. Remove  control  lever  (10)  by  removing  nut  (11). Remove lever stop (12), spring (13) washer (14), and guide (15). 3-68