TM 10-3930-664-24 Section IV.   FUEL SYSTEM MAINTENANCE Paragraph Title Page Number Number 3-19 Fuel Injector Replacement 3-61 3-20 Fuel Injector Pump Replacement 3-63 3-21 Fuel Injector Pump Repair 3-68 3-22 Fuel Tank Replacement 3-73 3-23 Fuel Tank Repair 3-76 3-24 Accelerator Slave Cylinder Replacement 3-79 3-25 Accelerator Actuator With Pedal Repair 3-82 3-19.   FUEL INJECTOR REPLACEMENT This task covers: Removal, Cleaning, Inspection, and Installation INITIAL SETUP: Tools and Test Equipment: General Mechanics Tool Kit (1, App. E) Torque Wrench (32, App.  E) Materials / Parts: Equipment Condition: Anti-Seize Compound (9, App, C) High pressure fuel lines Lubricating Oil (14, App. C) removed (para. 2-27) Banjo Connector Seal, Item 4 (4 ea.) Copper Washer, Item 7 (4 ea.) A. RFMOVAL 1. Remove   drain   line   (1)   from   fuel   injectors   (2)   by removing   banjo   connector   screws   (3)   and   banjo connector seals (4). CAUTION Fuel  injector  must  not  rotate  in  cylinder head     bore.          Rotation     will     damage cylinder head. 2. Place wrench on flats at top of fuel injector body (5) to hold body in place. 3-61