TM 10-3930-664-24 3-6. ENGINE ASSEMBLY REPLACEMENT This task covers: Removal, Cleaning, Inspection, and Installation INITIAL SETUP: Tools and Test Equipment: Materials / Parts: General Mechanics Tool Kit (1, App.   E) Loctite 242 (20, App.   C) Jack Stands, 6 ea.   (8, App.   E) Silicone Sealant (41, App.   C) Drain Pan (10, App.   E) Gasket, Item 4 (1 ea.) Chain with Screw Pin Shackle, Lockwashers, Items 69, 72 (8 ea.) 3 ea.   (46, App.   E) Bolt, 12mm x 3.0, GR8, course Hoist (59, App.   E) thread (3 ea.) Torque Wrench (32, App.   E) Washer, 1/2 inch (3 ea.) Torque Wrench (33, App.   E) Nut, 12mm (1 ea.) Open End Wrench, 1-3/4" (57, App.   E) Open End Wrench, 2" (58, App.   E) Socket Wrench Set, 3/4" Drive (55, App.   E) Equipment Condition: Personnel Required: Engine cover removed (para.   2-128) 2 personnel Transmission covers removed (para.   2-131) Radiator removed (para.   2-47) Air cleaner removed (para.   2-28) A. REMOVAL WARNING Electrical   shock   hazard.         Disconnect battery   ground   cable   or   power   source prior to working on electrical components.      Failure  to  heed  warning could  cause  shock,  injury  or  death.      If electrical  shock  occurs,  administer  first aid and seek medical assistance immediately. 1. Remove exhaust pipe (1) from exhaust manifold (2) by removing screws (3). Remove and discard casket (4). 3-9