Quantcast HYDRAULIC SYSTEM RESERVOIR REPLACEMENT
Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
TM 10-3930-664-24 2-164. HYDRAULIC SYSTEM RESERVOIR REPLACEMENT This task covers: Removal, Cleaning, Inspection, and Installation INITIAL SETUP: Tools and Test Equipment: Reference: General Mechanics Tool Kit (1, App.   E) TM 10-3930-664-12 Drain Pan (10, App.   E) Materials / Parts: Equipment Condition: Teflon Tape (35, App.   C) Right rear fender removed O-Ring, Item 10 (1 ea.) (para.   2-134) A. REMOVAL 1. Tag and disconnect hose assembly (1) from elbow (2).   Remove elbow from hydraulic reservoir (3). NOTE Hydraulic system reservoir capacity is 30 gallons. 2. Place drain pan beneath reservoir (3). Remove drain plug (4) and drain hydraulic reservoir. 3. Tag and disconnect hose assemblies (5, 6, 7). 4. Remove tee (8) and elbow (9) from hydraulic reservoir (3).   Remove and discard O-ring (10). 5. Remove hydraulic reservoir (3) from forklift frame by removing screws (11), washers (12), and nuts (13). 2-452

Integrated Publishing, Inc.