Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
TM 10-3930-664-24 2-162.  SIDESHIFT CYLINDER REPLACEMENT This task covers: Removal, Cleaning, Inspection, and Installation INITIAL SETUP: Tools and Test Equipment: Personnel Required: General Mechanics Tool Kit (1, App.  E) 2 Personnel Drain Pan (10, App.  E) Torque Wrench (32, App.  E) Materials / Parts: Equipment Condition: O-Ring, Item 25 (2 ea.) Sideshift carrier lowered and fully left References: TM 10-3930-664-10 A.  REMOVAL 1. Relieve    tension    on    sideshift    chains    (1)    by loosening  locking  nuts  (2).    Loosen,  but  do  not remove nuts (3). NOTE Place  drain  pan  beneath  hoses  when disconnecting to catch fluids. 2. Tag and disconnect tube assemblies (4, 5) from elbows (6). 3. Remove   nuts   (7),   washers   (8),   and   mounting plate   (9)   from   sideshift   cylinder   studs      (10). Remove  chain  adjustment indicator (11). 4. Release    mounting    bracket    (12)    from    rail    by removing screws (13) and washers (14). 5. Release  sideshift  cylinder  (15)  from  carrier  end plate  (16)  by  removing  screw  (17)  and  retainer (18). 2-446

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business