TM 10-3930-664-24 4. INSTALL  ELBOWS  (89),  FITTING  (112),  AND NEW  O-RINGS  (113,  114)  INTO   SEQUENCE VALVE (95). 5. INSTALL     SEQUENCE     VALVE     (95)     USING SCREWS (110) AND LOCKWASHERS (111). NOTE When  installing  a  new  diverter  valve, remove  diverter  valve  knob  from  old valve  and  use  on  new  valve.    Apply loctite   to   threads   on   spool   of   new diverter  valve  and  install  knob  onto spool. 6. INSTALL    FITTINGS    (105),    TEE    (106),    AND ELBOW  (107)  ONTO  DIVERTER  VALVE  (92). INSTALL  DIVERTER  VALVE  ONTO  BRACKET (108) USING SCREWS (109). 7. CONNECT HOSE ASSEMBLIES (96, 99) WITH FITTINGS AND FUSES. a. Install   elbows      (103)   and   new      O-rings (104)   into   bottom   of   main   lift   cylinders (80). b. Install fittings (102) onto elbows (103). c. Install      tee      (98),      fitting      (100),      and velocity fuses (101) onto fittings (102). d. Connect  hose  assembly  (99)  to  tee  (98) and fitting (100). e. Install elbow (97) onto tee (98). f. Connect    hose    assembly    (96)  to  elbow (97) and diverter valve (92). 2-429