TM 10-3930-664-24 10.  TAG AND DISCONNECT HOSE ASSEMBLIES (28, 29)   FROM   ROTATE   MANIFOLD   (15).      REMOVE FITTINGS. a. Tag  and  disconnect  hose  assemblies  (28,  29) from fittings (31, 32) and elbow (33). b. Carefully   feed   hose   assemblies   (28,   29)   over freelift chain roller. c. Remove    bulkhead    fitting    (31)    and  bulkhead elbow     (33)     from     sideshift     bracket     (34)     by removing nuts. d. Remove fittings  (32)  from rotate manifold (15). 11.  TAG AND DISCONNECT HOSE ASSEMBLIES (35, 36,          37,          38)     FROM     INTERMEDIATE     RAIL MANIFOLD (30).  REMOVE ADAPTERS. a. Tag  and  disconnect  hose  assemblies  (35,  36, 37, 38) from intermediate rail manifold (30). b. Remove     adapters     (39,     40)     from     sides     of intermediate   rail   manifold   (30).      Remove   and discard O-rings (41, 42). c. Remove adapters (43, 44) from top of intermediate   rail   manifold   (30).      Remove   and discard O-rings (45, 46). d. Tag  and  disconnect   hose   assembly   (47)   from bottom   of   intermediate   rail   manifold   (30)   and bottom of main lift cylinder. e. Remove  adapter  (48).   Remove        and    discard O-ring (49). 2-424