Quantcast CLEANING - TM-10-3930-664-24_457
Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
TM 10-3930-664-24 4. LOOSEN  SETSCREW  (30).    REMOVE  LEFT  TILT CYLINDER  (12)  FROM  FRAME  BRACKET  (18)  BY REMOVING  ROLL  PINS  (19)  AND  CYLINDER  PIN (20). 5. REMOVE CYLINDER (12) FROM MAST ASSEMBLY  (21)  BY  REMOVING  ROLL  PINS  (22) AND CYLINDER PIN (23). 6. MHE-271 MODEL ONLY: REMOVE TILT CYLINDER   BOOT   (24)   BY   REMOVING   SCREW (25), HOSE CLAMP (26), SCREWS (27), LOCKWASHERS (28), AND WASHERS (29). BREAK   SEALANT   AND   REMOVE   BOOT   FROM ROD END OF CYLINDER. 7. REPEAT     STEPS     4,     5,     6     FOR     RIGHT     TILT CYLINDER. B.  CLEANING Clean tilt cylinders in accordance with paragraph 1-24. C.  INSPECTION Inspect tilt cylinders and related components in accordance with paragraph 1-24. D.  INSTALLATION 1.  MHE-271 MODEL ONLY:  INSTALL TILT CYLINDER BOOT    (24)    OVER    ROD    END    OF    CYLINDER. SECURE  BOOT  TO  CAB  COVER  USING  SCREW (25), HOSE CLAMP (26), SCREWS (27), LOCKWASHERS (28), AND WASHERS (29). 2. INSTALL  LEFT  TILT  CYLINDER  (12)  ONTO  MAST ASSEMBLY  (21)  USING  CYLINDER  PIN  (22)  AND ROLL PINS (23). 3. INSTALL LEFT TILT CYLINDER (12) ONTO FRAME BRACKET  (18)  USING  CYLINDER  PIN  (19)  AND ROLL PINS (20). 4. APPLY GREASE TO CYLINDER GREASE FITTING (31).          FILL     UNTIL     GREASE     FLOWS     FROM FITTING.  WIPE AWAY EXCESS GREASE. 5. REPEAT    STEPS    1,    2,    3,    4    FOR    RIGHT    TILT CYLINDER. 2-408

Integrated Publishing, Inc.