Quantcast CLEANING - TM-10-3930-664-24_436
Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
TM 10-3930-664-24 3 RELEASE  HOOD  ASSEMBLY  (9)  BY  LIFTING HANDLE (10).  OPEN HOOD ASSEMBLY. 4 REMOVE   TOP   TRANSMISSION   COVER   (11) BY    REMOVING    NINE    SCREWS    (12)    AND WASHERS (13). 5 TAG   AND   DISCONNECT   HOSES   (1,   7,   16) FROM ENGINE AND RADIATOR. a. Tag  inlet  hose (1).  Disconnect  inlet hose from tee (14) at top of engine by loosening clamp (15). b. Tag  and  disconnect  short  hose  (16)  from tee (14) and radiator fitting (17). c. Tag   outlet   hose   (7).      Disconnect   outlet hose from tee (18) at bottom of engine by loosening clamp (19). d. Remove  tees  (14,  18)  from  engine  only  if replacement is required. B.  CLEANING Clean heater hoses and related components in accordance with paragraph 1-24. C.  INSPECTION Inspect     heater     hoses     and     related     components     in accordance with paragraph 1-24. D.  INSTALLATION 1 CONNECT HOSES (1, 7, 16) TO ENGINE AND RADIATOR. a. Install  tees  (14,  18)  into  engine,  ensuring proper orientation. b. Connect   outlet   hose   (7)   to   tee   (18)   at bottom  of  engine.    Secure  by  tightening clamp (19). c. Connect short hose (16) to tee (14) at top of engine and radiator fitting (17). d. Connect  inlet hose (1) to tee  (14). Secure by tightening clamp (15). 2-387

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business